2 part liquid Epoxy glue / potting compound. Hard wearing 2 part glue that can be brushed or poured. Can be used in scenic work or to fix liquid lead in place without the chemical reaction PVA creates.

500ml of Aliphatic resin wood glue. This glue sets stronger penetrates deeper than PVA giving a stronger joint. it also sets harder making it easier to sand of any excess

Araldite 2 part Expoxy in tubes. This product is a slow setting glue but is probably the strongest glue on the market, substantially more so than either Superglue or 5 min epoxy

Araldite Precision Extra Strong 2 part Epoxy glue for sticking most materials. A 2 syringe pack 24ml. Mix very thoroughly forcing it into itself. I find this the strongest glue on the market.

Aradite Rapid 15 minute 2 part Epoxy Glue in a handy 2 syringe pack (Mix equal parts thourghly)

Aradite Rapid 15 minute 2 part Epoxy Glue, in a handy 2 tube pack (Mix equal parts thourghly)

100 ml bottle of Butanone. This a strong plastic solvent used for the harder plastics used in some kits and trackwork. It works by disolving a thin layer of the plastic and then evaporating leaving the plastic intack. Suitable for gluing track chairs to wood

28ml bottle of Clearfix used for both glueing clear polysyrene windows inc plasticard without frosting, and for making small glazed apertures (approx 3mm) by dragging across the opening

DAZ White Air drying Clay 485gram pack

A water based solution to firstly soften decals to fit over intricate detail, and then secures them as it dries.

Devcon High strength 5 minute epoxy in 2 1/2oz tubes

A 2 part Epoxy Resin/Glue. I like this because it is just a little bit thinner than normal Epoxy glue but it also sets a little slower giving you more chance to do a few parts before setting or more chance to get it in the correct position. Not cheap but they are large bottles 237ml total

31ml tube of 1 part filler. Can be thinned with cellulose thinners. Needs adding in thin layers. Will sand and take a very fine finish

Humbrol Precision Polystyrene cement / solvent. Slightly thicker consistancy than mek pak and evaporates slightly slower as well. Supplied in a plastic bottle with long slender metal neegle for accurate positioning

D-Limonene Polystyrene solvent. 100ml glass bottle. This has a slower evaporation rate than Mek-Pak and so is a little more gentle. Used maimly for small parts and windows as it normally does not frost glazing strip, but can be used for all plasticard work. Due the slower evaporation this is excellent for laminating sheets together. Not suitable for ABS or harder plastics

Origional Slaters Mek-pak solvent adhesive. Suitable for use on all Polystyrene products, inc Plastikard, Evergreen, Airfix kits etc

2 Part Epoxy putty. Milliput Super Fine White. Mix equal parts to produce a fine putty that will set hard, that can be filed, sawn, sanded, drilled etc

Plasticweld 57ml Bottle of med strength plastic solvent