5 Aluminium sheets corrugated to represent a sheet of domestic corrugated iron 8ft long

I Metre coil of copper flat strip 8 thou thick

I Metre coil of copper flat strip 8 thou thick

0

Etched Brass rectangular pattern although intended for 1/700 useful for any scale

This is specially flattened wire hence the 2 thin edges are very slightly rounded and the wire is not straight but slightly curved but still approx 305mm lg 1ft

Fibre Glass and Epoxy sheet 0.4mm (1/64") thick 163mm x 103mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. (Picture shows similar material)

Approx 150mm x 100mm 6 x 4 inch 0.6mm 24 thou thick Glass reinforced Printed Circuit board Material

Fibre Glass and Epoxy sheet 0.8mm (1/32") thick 324mm x 103mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. The length of this item makes it useful for chassis of coaches(Picture shows similar material)

Approx 150 x 100mm 6 x 4 inch

Fibre Glass and Epoxy sheet 1.6mm (1/16") thick 160mm x 100mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. (Picture shows single sided)

Fibre Glass and Epoxy sheet 1.6mm (1/16") thick 160mm x 100mm coated with copper film on 1 side. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong.

Plain PCB copper on 1 side only 1.6mm thick approx 160mm x 100mm resin and paper based. Not as strong as the Glass fibre based board but does not blunt tools the same

PCB with thin Strips of copper and holes every 0.1 inch. Used for1 off or prototype circuits or connecting a number of wires. Can help with connecting multiple wires under a loco chassis or as a mini busbar/earth strip under the layout