An arbor which fits into mini drills to hold small cutting discs.

Pack containing 12 blades and 2 pencil leads for the Dafa Compass or Arc or Circle cutter

Circle and Arc Cutter. Fitted with point on one arm and cutting blade on the other.

Can not only be used for making a very small countersink but will also cut sideways. Has Std 3/32" shaft for easy change with other tools

Can not only be used for making a small countersink but will also cut sideways. Has a std 3/32" shaft for easy tool change

Can not only be used for making a small countersink but will also cut sideways

A replacement blade for the 60mm DAFA rotary cutter but will fit other cutters of the same size

A sharp bladed DAFA 60mm Rotary Cutter with soft grip handle useful for cutting foam track underlay in situ

Fits the larger handles 2 and 5 or C and D

Takes all the larger Xacto blades and saws

Very Small knife where the blade swivels in its holder for following intricate curves Search EXCELSWIVELB for spare blades

Pack of 2 blades 20064 for the K4 knife

2 straight 1 small straight 1 curved and 1 chisel blade to fit either X-acto Excel or Expo small round handle knife

12mm wide straight chisel type blade. Similar to the Xacto and Excel T18

6 mm wide straight chisel type blade. Similar to the Xacto and Excel T17

Keyhole saw blades approx 14TPI Pack of 5

Fits Xacto No 5 Handle or similar Blade 1 1/4 inch deep 5 inch lg with 54 teeth per inch

Expert tool for cutting small dia tubes sections and wires both sq and 45 deg It has a built in ruler and length stop Clamp in the vice set length and cut thru the slot provided with a jewellers saw.

Slide finger thru hole and press uses std Xacto Blades

A pack of full size (12 inches) Hacksaw blades of 24 teeth per inch

Jewellers/Piercing saw frame which is adjustable for both new and broken blades. Has a 3 inch throat.

Jewellers/Piercing saw frame which is adjustable for both new and broken blades. Has a 6 inch throat more suitable for cutting the slots ready to insert horn blocks on 7mm locos

Jewelery Saw Blades Size 1. (Pack of 12) Larger the number finer the saw.

Jewelery Saw Blades size 2/0 (Pack of 12). In paint brush terms this is a 00 They have 56 teeth per inch. They are the best make, pricey but good.

Jewelery Saw Blades size 3/0 (Pack of 12). In paint brush terms this is a 000 They have 61 teeth per inch. They are the best make, pricey but good.

Top Quality pack of 12 round back (for sharper curves) Jewellers or Piercing saw blades very fine 66 teeth per inch As with all piercing saw blades they have no pegs at the end so will need a saw frame with straight clamps capable of a saw blade 130mm or 5 inches

Quite a course jewellers or piercing saw blade Suitable for plastics wood and metal thicker than 1.0mm

Top Quality Glardon Vallorbe round back (for sharp corners) pack of 12 blades 71 TPI suitable for cutting thin metal

Top Quality Glardon Vallorbe round back (for sharp corners) pack of 12 blades 76 TPI suitable for cutting thin metal

Top Quality Glardon Vallorbe round back (for sharp corners) pack of 12 blades 89 TPI These are finest currently available

A pack of blades to fit Junior Hacksaws

A rotary rolling sharp disc cutter for small diameter 1/16th inch upwards. Cuts with a square clean edge.

Small plane for shaving wood All metal construction

1 each 1mm 2mm and 3mm dia

Pack of 12 scrollsaw blades with no pin at the ends

Pack of 12 scrollsaw blades with no pin at the ends

Pack of 12 scrollsaw blades with no pin at the ends

0

0