0

Fitted with No 102 2.3mm bit

Hoof shape bit suitable for the Antex type C 15W soldering iron

Std 240volt with UK plug soldering iron 18Watts fitted with std 2.3mm hoof shape bit The std CS TCS bits fit this iron

Fitted with No 10 0.5mm bit

Std 240volt with UK plug soldering iron 25Watts fitted with std 3mm hoof shape bit The std XS bits fit this iron

0

Supplied to me in 12inch lengths, however they are very brittle and I usually break in 2 and post out 2 lengths approx 6 inches long. Please e-mail me or add some comments at ordering if you want them full length, boxed but you accept the risk.

Xytronic / PDR 100 Watt variable Temprature Soldering Station. This unit has been replaced by the LF1700. However spare parts and replacement bits are still available. please contact us for help

This is a absolute dream to use, precise, controllable, and powerful. Professional quality Soldering Station. 1 soldering Iron to do Whitemetal, electronics, small etched kits right up to '0' Gauge and above, using a selection of easy change bits available, held in place by a screwed shroud not affected by flux spray. Please note this item is heavy and will be delivered by courier for approx £10 (Website can't handle using a courier for certain things but I will refund any excess it charges, please ask if in doubt)

Std Butane fillable gas torch for small but larger model jobs where a sodering iron is not enough. Self standing, self ingnition, gas control slider.

London Road Models Resistance Soldering Unit. 240 Volt unit Made in and sold for the UK. (UK Plug) Complete with superflex cables, footswitch & carbon rods. Please note this is a very heavy unit (4.3KG net). I will post if required at 16 GBP for a insured 4-5 day delivery but next day is 28GBP via Royal Mail special delivery, now the only insured postage UK)(Overseas at cost)(If you buy online you will be expected to either collect or to pay the postage by paypal credit or debit card etc) you can of course either pick up from here, or at an exhibition. Please ring or email for details on the unit or postage. - . If out of stock a 20GBP will secu re one of the next batch.

1.25M of each Black and Red cable for the leads of a Resistance Soldering Unit. High current Flexible Cable.

1 red and 1 black plug/connector to either replace the connectors on an Resistance Soldering Unit, or to make extra, or special leads. High current flexible wire and a soldering iron will be needed.

0

For use on a LF1600 only. This is the long tube that fits over the bit and element but not the barrel nut

Replacement Barrel that holds the bit and covers the element for LF1700

This knurled nut for the Xytronic LF1600 & LF1700 holds the shroud/barrel that fits over the soldering iron bits. IE the part you undo if you wish to change the bit.

This item is just the element and will need std tools inc a soldering iron to fit.

Suitable for Xytronic LF1600. This is the part that holds the heating element in the handle

Replacement part that holds the element in place of the Iron for the LF1700 Solder Station

This is a complete spare Iron inc tip for the Xytronic LF1600 solder station. Plug in the connector and you are up and running.

0