Fibre Glass and Epoxy sheet 0.4mm (1/64") thick 163mm x 103mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. (Picture shows similar material)

Approx 150mm x 100mm 6 x 4 inch 0.6mm 24 thou thick Glass reinforced Printed Circuit board Material

Fibre Glass and Epoxy sheet 0.8mm (1/32") thick 324mm x 103mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. The length of this item makes it useful for chassis of coaches(Picture shows similar material)

Approx 150 x 100mm 6 x 4 inch

Fibre Glass and Epoxy sheet 1.6mm (1/16") thick 160mm x 100mm coated with copper film on both sides. Although intended for the manufacture of Printed Circuit Board. (PCB) It is used for mounting loco pickups on. Can be glued to the chassis and pickups can be soldered on to the copper. Being high quality epoxy and fibre glass it is easy to cut/file and shape to meet specific loco requirements, while being very strong. (Picture shows single sided)